VODIPREN 90

LIQUID WATERPROOFING ELASTOMER BITUMINOUS MEMBRANE IN EMULSION (ECOLOGICAL PRODUCT)

PRODUCT DESCRIPTION

VODIPREN 90 is a semi-fluid paste ready for the use made up of an emulsion of selected bituminous addetives together with special synthetic resins and mineral fillers. Thus, the bituminous paste obtained is brown. While drying, it will become dark black, showing an excellent adhesiveness to the support and an high elasticity (more than 1000%). It can be also applied on vertical surface and it will be able to bear temperatures under 0° C. VODIPREN 90 does not contain any noxious substance or solvent. Its extreme easy application its versatility and its excellent performances make of it a necessarY accessory for building. It can also be considered the professional waterproofing material or the ideal product for "bricolage".

PRIMARY USES

VODIPREN 90 has been studied to obtain lasting and practical waterproofing of every kind of vertical or horizontal surface, thus allowing the realization of continuos bituminous membranes, strongly anchored to the whole laying surface. Then it will be used for the waterproofing of terraces, balconies, pent roofs, foundation walls, large slabs as well as for the restoration of old bituminous membranes, for the sealing of chimneys, cement or metallic gutters, for the adhesion of barriers to vapour etc.. Moreover VODIPREN 90 shows high value of mechanical  hysteresis. This allows VODIPREN 90 together with sound-absorbent panels to reduce the transmission of stamping noise, thus softening the noise of the machinery's vibration. 

INSTRUCTIONS FOR THE USE

VODIPREN 90 is ready for the use. It can be applied by means of a roller, a brush, a trowel, a spray or airless equipment. An homogenous thickness may be obtained using a 2 mm notched spatula for the first coat, and a smooth spatula for the second coat when the first one is dried. To this way one abtains a regular coat of about 2 mm Carefully clean the surfaces and settle the eventually disconnected supports by means of well smoothed grout so as to avoid a product waste.  Its consumption varies according to the roughness of the support.It is approximately recommended in 1,5 - 2 Kg/m² It is possible to strenghthen VODIPREN 90 layer englobing during its application a light film of non-woven polyester (VODITES) of 40 gr./mq, laying the lenghts of polyester until a thickness of 5 cm VODITES is extremely necessary for big coverings.  

TECHNICAL FEATURES

VODIPREN 90                                         

PRECAUTIONS

Avoid the application of VODIPREN 90 on wet surfaces, at temperatures below 5° C or the rain or fog are expected within the next few hours. The ideal application conditions should be guaranteed for at least 24 hours after the application. After drying it will be better to cover the waterproof coat obtained with VODIPREN 90 with an elastic coloured coating (VODICOLOR EXTRA). This operation will be done after 15 days from the application. The tools may be cleaned with water until the product won't be dry. After drying, gas-oil or solvents will be necessary. On request, it is possible to formulate VODIPREN 90 with anti-root additives. The product is sensitive to cold.